0
×

Your shopping cart is empty.

View Cart
  • Home
  • Shop By Type
  • Embossing Seals
  • Engineer, Architects, Surveyors Supplies
  • Engraved Signs
  • Stamp Design Wizard
  • Address Stamps
  • Signature Stamps
  • Bank Deposit Stamps
  • Inspector Stamps
  • Date Stamps
  • Numbering Stamps
  • Refill Ink & Stamp Pads
  • Stock Title Stamps
  • Roadway Products
  • 2nd Amendment
  • Xstamper
  • Full Color IDs,
  • APD MOBILE FORCE
  • Central High Wildcats

Xstamper

74 items found
Sort By
Product # Description Price Add


Industrial Round Stamp - Impression Size: 1/4" Diameter

Make your mark almost anywhere with the pre-inked industrial stamps by Xstamper. Our proprietary ink formulation is fast drying, permanent and water-resistant when fully cured. The uniquely designed caps are engineered to keep ink from drying out. These stamps are ideal for marking on any slick or hard to mark surfaces. 

*Note: This stamp is a round stamp. If you choose to have a border, this site will show your stamp preview with a square border. Please know that your stamp will be made with a round border. 

*Average drying time for the "F-Series" stamps is around 90-120 seconds but may vary due to atmosperic conditions. 

MUST USE XSTAMPER'S INDUSTRIAL REFILL INK ONLY!

Re-Inking Instructions:
1. Remove the cap and place face down. 
2. Hold stamp handle firmly and pull out die holder from handle. 
3. Place die holder on top of removed cap with impression die facing down. Hold die firmly and remove top plug.
4. Place one drop of Industrial Refill Ink into the F06 opening. 

Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad. 

         Works on the following Surfaces with Results:

  • A.B.S (Excellent)
  • Acrylic Board (Excellent)
  • Aluminum (Excellent) 
  • Brass (Excellent)
  • Cellophane (Excellent)
  • Ceramic (Good)
  • Cotton Cloth (Excellent)
  • General Painted Surfaces (Excellent) 
  • Glass (Good)
  • Hard & Soft P.V.C. (Good)
  • Leather (Good)
  • Melamine Coated Board (Good)
  • Plywood (Good)
  • Polyester Film (Excellent)
  •  
  • Art Paper (Excellent) 
  • Coated Paper (Good)
  • Construction Paper (Excellent) 
  • Corrugated Paper (Excellent) 
  • Hard & Regular Tracing Paper (Good) 
  • Letter Paper (Good) 
  • Photographic Paper (Excellent)
  • Polyethylene Film (Fair) 
  • Polypropylene (Good) 
  • Rubber (Fair) 
  • Stainless Steel (Excellent) 
  • Styrofoam (Good) 
  • Synthetic Fabric (Good)  
  •  
    $38.85
    $27.20
    Customize
    Details
    $38.85
    $27.20


    Industrial Round Stamp - Impression Size: 1/4" Diameter

    Make your mark almost anywhere with the pre-inked industrial stamps by Xstamper. Our proprietary ink formulation is fast drying, permanent and water-resistant when fully cured. The uniquely designed caps are engineered to keep ink from drying out. These stamps are ideal for marking on any slick or hard to mark surfaces. 

    *Note: This stamp is a round stamp. If you choose to have a border, this site will show your stamp preview with a square border. Please know that your stamp will be made with a round border. 

    *Average drying time for the "F-Series" stamps is around 90-120 seconds but may vary due to atmosperic conditions. 

    MUST USE XSTAMPER'S INDUSTRIAL REFILL INK ONLY!

    Re-Inking Instructions:
    1. Remove the cap and place face down. 
    2. Hold stamp handle firmly and pull out die holder from handle. 
    3. Place die holder on top of removed cap with impression die facing down. Hold die firmly and remove top plug.
    4. Place one drop of Industrial Refill Ink into the F06 opening. 

    Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad. 

             Works on the following Surfaces with Results:

  • A.B.S (Excellent)
  • Acrylic Board (Excellent)
  • Aluminum (Excellent) 
  • Brass (Excellent)
  • Cellophane (Excellent)
  • Ceramic (Good)
  • Cotton Cloth (Excellent)
  • General Painted Surfaces (Excellent) 
  • Glass (Good)
  • Hard & Soft P.V.C. (Good)
  • Leather (Good)
  • Melamine Coated Board (Good)
  • Plywood (Good)
  • Polyester Film (Excellent)
  •  
  • Art Paper (Excellent) 
  • Coated Paper (Good)
  • Construction Paper (Excellent) 
  • Corrugated Paper (Excellent) 
  • Hard & Regular Tracing Paper (Good) 
  • Letter Paper (Good) 
  • Photographic Paper (Excellent)
  • Polyethylene Film (Fair) 
  • Polypropylene (Good) 
  • Rubber (Fair) 
  • Stainless Steel (Excellent) 
  • Styrofoam (Good) 
  • Synthetic Fabric (Good)  
  •  
    $38.85
    $27.20
    Customize
    Details
    $38.85
    $27.20


    Industrial Return Address Stamp - Impression Size: 1/2" x 1-5/8"

    Make your mark almost anywhere with the pre-inked industrial stamps by Xstamper. Our proprietary ink formulation is fast drying, permanent and water-resistant when fully cured. The uniquely designed caps are engineered to keep ink from drying out. These stamps are ideal for marking on any slick or hard to mark surfaces. 

    *Average drying time for the "F-Series" stamps is around 90-120 seconds but may vary due to atmosperic conditions. 

    Must Use Xstamper's Industrial Refill Ink only. 

    Re-Inking Instructions:
    1. Remove the holder and take off the handle. 
    2. Place 10 drops of Industrial Refill Ink into the openings. 

    Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad. 

                Works on the following Surfaces with Results:

  • A.B.S (Excellent)
  • Acrylic Board (Excellent)
  • Aluminum (Excellent) 
  • Brass (Excellent)
  • Cellophane (Excellent)
  • Ceramic (Good)
  • Cotton Cloth (Excellent)
  • General Painted Surfaces (Excellent) 
  • Glass (Good)
  • Hard & Soft P.V.C. (Good)
  • Leather (Good)
  • Melamine Coated Board (Good)
  • Plywood (Good)
  • Polyester Film (Excellent)
  •  
  • Art Paper (Excellent) 
  • Coated Paper (Good)
  • Construction Paper (Excellent) 
  • Corrugated Paper (Excellent) 
  • Hard & Regular Tracing Paper (Good) 
  • Letter Paper (Good) 
  • Photographic Paper (Excellent)
  • Polyethylene Film (Fair) 
  • Polypropylene (Good) 
  • Rubber (Fair) 
  • Stainless Steel (Excellent) 
  • Styrofoam (Good) 
  • Synthetic Fabric (Good)  
  • $62.74
    $43.92
    Customize
    Details
    $62.74
    $43.92


    Industrial Large Inspection Stamp w/STRT Text - Impression Size: 7/16" Diameter

    Make your mark almost anywhere with the pre-inked industrial stamps by Xstamper. Our proprietary ink formulation is fast drying, permanent and water-resistant when fully cured. The uniquely designed caps are engineered to keep ink from drying out. These stamps are ideal for marking on any slick or hard to mark surfaces. 

    *Note: This stamp is a round stamp. If you choose to have a border, this site will show your stamp preview with a square border. Please know that your stamp will be made with a round border. 

    *Average drying time for the "F-Series" stamps is around 90-120 seconds but may vary due to atmosperic conditions. 

    MUST USE XSTAMPER'S INDUSTRIAL REFILL INK ONLY!

    Re-Inking Instructions:
    1. Remove the cap and place face down. 
    2. Hold stamp handle firmly and pull out die holder from handle. 
    3. Place die holder on top of removed cap with impression die facing down. Hold die firmly and remove top plug.
    4.Place one drop of Industrial Refill Ink into the F11 opening. 

    Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad. 

                Works on the following Surfaces with Results:

  • A.B.S (Excellent)
  • Acrylic Board (Excellent)
  • Aluminum (Excellent) 
  • Brass (Excellent)
  • Cellophane (Excellent)
  • Ceramic (Good)
  • Cotton Cloth (Excellent)
  • General Painted Surfaces (Excellent) 
  • Glass (Good)
  • Hard & Soft P.V.C. (Good)
  • Leather (Good)
  • Melamine Coated Board (Good)
  • Plywood (Good)
  • Polyester Film (Excellent)
  •  
  • Art Paper (Excellent) 
  • Coated Paper (Good)
  • Construction Paper (Excellent) 
  • Corrugated Paper (Excellent) 
  • Hard & Regular Tracing Paper (Good) 
  • Letter Paper (Good) 
  • Photographic Paper (Excellent)
  • Polyethylene Film (Fair) 
  • Polypropylene (Good) 
  • Rubber (Fair) 
  • Stainless Steel (Excellent) 
  • Styrofoam (Good) 
  • Synthetic Fabric (Good)  


  • $39.48
    $27.64
    Customize
    Details
    $39.48
    $27.64


    Industrial Large Inspection Stamp w/STRT Text - Impression Size: 5/8" Diameter

    Make your mark almost anywhere with the pre-inked industrial stamps by Xstamper. Our proprietary ink formulation is fast drying, permanent and water-resistant when fully cured. The uniquely designed caps are engineered to keep ink from drying out. These stamps are ideal for marking on any slick or hard to mark surfaces. 

    *Note: This stamp is a round stamp. If you choose to have a border, this site will show your stamp preview with a square border. Please know that your stamp will be made with a round border. 

    *Average drying time for the "F-Series" stamps is around 90-120 seconds but may vary due to atmospheric conditions. 

    MUST USE XSTAMPER'S INDUSTRIAL REFILL INK ONLY!

    Re-Inking Instructions:
    1. Remove the cap and place face down. 
    2. Hold stamp handle firmly and pull out die holder from handle. 
    3. Place die holder on top of removed cap with impression die facing down. Hold die firmly and remove top plug.
    4.Place one drop of Industrial Refill Ink into the F16 opening. 

    Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad. 

                Works on the following Surfaces with Results:

  • A.B.S (Excellent)
  • Acrylic Board (Excellent)
  • Aluminum (Excellent) 
  • Brass (Excellent)
  • Cellophane (Excellent)
  • Ceramic (Good)
  • Cotton Cloth (Excellent)
  • General Painted Surfaces (Excellent) 
  • Glass (Good)
  • Hard & Soft P.V.C. (Good)
  • Leather (Good)
  • Melamine Coated Board (Good)
  • Plywood (Good)
  • Polyester Film (Excellent)
  •  
  • Art Paper (Excellent) 
  • Coated Paper (Good)
  • Construction Paper (Excellent) 
  • Corrugated Paper (Excellent) 
  • Hard & Regular Tracing Paper (Good) 
  • Letter Paper (Good) 
  • Photographic Paper (Excellent)
  • Polyethylene Film (Fair) 
  • Polypropylene (Good) 
  • Rubber (Fair) 
  • Stainless Steel (Excellent) 
  • Styrofoam (Good) 
  • Synthetic Fabric (Good)  
  • $42.11
    $29.48
    Customize
    Details
    $42.11
    $29.48


    Pre-Inked Small Message Stamp - Impression Dimensions: 3/8" x 11/16"

    Great for short message and inspection stamping. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.

    Re-Inking Instructions: Remove the handle (top) and place 3 to 4 drops of ink into the opening of the stamp.  

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Inspection Stamping
  • Small Messages 
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty 
  • $23.75
    $16.63
    Customize
    Details
    $23.75
    $16.63


    Pre-Inked Small Message Stamp - Impression Dimensions: 1/2" x 1-1/16" 

    Great for a small address or for inspection stamping. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.

    Re-Inking Instructions: Remove the handle (top) and place 3 to 4 drops of ink in the opening of the stamp.  

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Inspection Stamping
  • Small Messages 
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty
  • $25.75
    $18.03
    Customize
    Details
    $25.75
    $18.03


    Pre-Inked - Single Line Stamp - Impression Dimensions: 1/8" x 2-3/8"

    Perfect for email addresses, website addresses, company names etc... **Note: NOT Recommended for Signatures**. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink voids out the warranty. 

    Re-Inking Instructions: Remove the handle (top) and place 3 to 4 drops of ink between the openings of the stamp.   

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • E-mail Addresses
  • Website Addresses
  • Company Names
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty
  • $25.15
    $17.61
    Customize
    Details
    $25.15
    $17.61


    Pre-Inked Round Inspection Stamp - Impression Dimensions: 1/4" Diameter

    This straight text stamp is perfect for inspection stamping. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void the warranty. 

    This is a round stamp. If you choose a border, the preview on this site will show you a square border. Please know that we will make the border round. 

    Re-Inking Instructions: Remove the handle (top) and place 3 to 4 drops of ink into the opening of the stamp.  

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Inspection Stamping
  • Initials on a Document
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty
  • $24.40
    $17.08
    Customize
    Details
    $24.40
    $17.08


    Pre-Inked  Return Address Stamp - Impression Dimensions: 1/2" x 1-5/8"

    Perfect for bank endorsements, address, or message stamping. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void the warranty.

    Re-Inking Instructions: Remove the handle (top) and place 3 to 4 drops of ink into the openings of the stamp.

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Bank Endorsements
  • Address Stamps
  • Message Stamps
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty
  • $30.15
    $21.11
    Customize
    Details
    $30.15
    $21.11


    Pre-Inked Large Address Stamp - Impression Dimensions: 11/16" x 1-15/16"

    Great for return address, or as a message stamp. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void the warranty.

    Re-Inking Instructions: Remove handle (top) and place 3 to 4 drops of ink into the openings of the stamp.   

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Return Addrress Stamping
  • Message Stamping
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty
  • $34.05
    $23.84
    Customize
    Details
    $34.05
    $23.84


    Pre-Inked Endorsement Stamp - Impression Dimensions: 1" x 2"

    This stamp is good for bank endorsements, larger address stamps, or a message stamp. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.

    Re-Inking Instructions: Remove handle (top) and place 3 to 4 drops of ink into the openings of the stamp.    

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Bank Endorsements
  • Large Address Stamps
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty
  • $40.25
    $28.18
    Customize
    Details
    $40.25
    $28.18


    Pre-Inked Business Address Stamp - Impression Dimensions: 9/16" x 2"

    Perfect for a return address stamp or a message stamp. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty. 

    Re-Inking Instructions: Remove the handle (top) and place 3 to 4 drops of ink between the openings of the stamp.  

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Return Address Stamps
  • Message Stamps
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty
  • $30.45
    $21.32
    Customize
    Details
    $30.45
    $21.32


    Pre-Inked Business Address Stamp - Impression Dimensions: 5/8" x 2-7/16"

    Prefect for address, signature or message stamping. This stamp is also most commonly used as a Notary Stamp. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty. 

    Re-Inking Instructions: Slide the impression cartridge out of the handle and place 2 to 3 drops of ink in each of the openings of the cartridge.   

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Address Stamping
  • Message Stamping
  • Notary Stamping
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty
  • $42.55
    $29.79
    Customize
    Details
    $42.55
    $29.79


    Pre-Inked Message Stamp - Impression Dimensions: 1-1/2" x 2-1/2"

    Large message stamps are great for all offices and personal uses. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty. 

    Re-Inking Instructions: Remove the handle (top) and place 3 to 4 drops of ink into the opening of the stamp.   

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Large Message stamp
  • General Office Use
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty
  • $49.60
    $34.72
    Customize
    Details
    $49.60
    $34.72


    Pre-Inked Large Message Stamp - Impression Dimensions: 15/16" x 2-13/16"

    This stamp is perfect for a large address stamp, message stamp or as a signature stamp. It can also be used as a notary stamp.  The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.

    Re-Inking Instructions: Slide the impression cartridge out of the handle and place 2 to 3 drops of ink into each of the 4 openings on the cartridge.  

    Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty 
  • Recommended Uses:
  • Files
  • Documents
  • Any Type of Paperwork
  • $46.45
    $32.52
    Customize
    Details
    $46.45
    $32.52


    Pre-Inked Message Stamp - Impression Dimensions: 1-15/16" x 2-15/16"

    Convenient for all office and personal uses. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty. 

    Re-Inking Instructions: Slide the impression cartridge out of the handle and place 2 to 3 drops of ink in each of the openings of the cartridge.   

    Recommendations:
    Re-ink your stamp pad overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • General Office Stamping
  • Large Message Stamping
  • Features:
  • Xstamper (Oil Based) Ink
  • Xstamper Lifetime Warranty
  • $91.45
    $64.02
    Customize
    Details
    $91.45
    $64.02


    Pre-Inked Large Message Stamp - Impression Dimensions: 1-3/16"  x 3-1/8"

    Perfect for all office and personal uses. Personalize with a message, signature, logo and/or artwork. Also commonly used as a Notary Stamp. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.

    Re-Inking Instructions: Remove the handle (top) and place 3 to 4 drops of ink into the openings of the stamp.

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Large Message Stamp
  • Signature Stamp
  • Notary Stamp
  • Features:
  • Xstamper (Oil Based) Ink
  • 50,000 Initial Impressions
  • Xstamper Lifetime Warranty
  • $79.75
    $55.83
    Customize
    Details
    $79.75
    $55.83


    Pre-Inked Long Phrase Stamp - Impression Dimensions: 11/16" x 3-5/16

    This stamp is commonly used as a company name stamp, large phrase stamp or a long signature stamp. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill only. Use of any other ink will void out the warranty. 

    Re-Inking Instructions: Slide the impression carridge out of the handle and place 3 to 4 drops of ink in each opening of the cartridge.   

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Company Name Stamp
  • Large Phrase Stamp
  • Long Signature Stamp
  • Features:
  • Xstamper (Oil Based) Ink
  • 50,000 Initial Impressions
  • Xstamper Lifetime Warranty
  • $50.25
    $35.18
    Customize
    Details
    $50.25
    $35.18


    Pre-Inked Large Message Stamp - Impression Dimensions: 1-9/16" x 3-15/16"

    Great for offices and personal uses. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty. 

    Re-Inking Instructions: Slide the impression cartridge out of the handle and place 3 to 4 drops of ink into each opening of the cartridge.   

    Recommendations:
    Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.

    Recommended Uses:
  • Large Address Stamp
  • Large Signature Stamp
  • Large Message Stamp
  • Features:
  • Xstamper (Oil Based) Ink
  • 50,000 Initial Impressions
  • Xstamper Lifetime Warranty
  • $102.75
    $71.93
    Customize
    Details
    $102.75
    $71.93